O MTCUME possui foco em gerência de usuário, HotSpot, túneis avançados e Radius. O curso destina-se a profissionais da área de redes de computadores e de provedores de internet.
Pré-requisitos:
- Conhecimentos em redes de computadores e protocolo TCP/IP;
- Ter feito o curso MTCNA;
- Pra fazer a prova de certificação o aluno já deverá ter a certificação MTCNA.
- Ter feito o curso MTCNA;
- Pra fazer a prova de certificação o aluno já deverá ter a certificação MTCNA.
Conteúdo Programático:
PPP
- PPP Profile + LAB;
• Local and Remote addresses; • Incoming/Outgoing Filters;
• Address List;
• Change TCP-MSS;
• Use Encryption;
• Session Timeout;
• Rate-Limit configuration;
• Only-one setting; - PPP Secret + LAB;
• Service and Profile;
• Local and Remote address;
• Routes configuration;
• Limit Bytes In/Limit Bytes Out configuration; - IP Pool;
• Set addresses ranges; • Next Pool options;
PPTP/L2TP
- PPTP and L2TP; • Theory;• Comparison;
- PPTP Client configuration + LAB;• Client Setup;
• Set profile;
• Dial-on-Demand;
• Add Default Route and static routes; - PPTP Server configuration + LAB; • Enable server;• Setup profiles;
• Add clients to /ppp secret;
• Set static interfaces for clients; - L2TP Client configuration + LAB; • Client setup;• Configure profile;
• Dial-on-Demand;
• Add Default Route and static routes; - PPTP Server configuration + LAB; • Enable server;• Set profiles;
• Add clients to /ppp secret;
• Set Static interfaces for clients;
PPPOE
- PPPoE server and client; • Theory;• Usage environment;• Comparison to othe PPP protocols;
- PPPoE client configuration + LAB;• Client setup;
• Select interface; • Service name
• Configure profile; - PPPoE Server configuration + LAB;
- Enable PPPoE server;
- Set profiles;
- Add clients to /ppp secret;
- Add Static interfaces for clients;
- Secure server by removing any IP address from PPPoE serverinterface;
- Encryption + LAB;• Set profile without encryption;
• Set profile with encryption;
• Configure PPPoE client without encryption; - Interface ECMP;
• set ECMP routes for ppp interfaces;
PPP Bridging
- L2TP and EoIP + LAB; • Set L2TP tunnel;• Set EoIP tunnel;
• Create bridge and add necessary interfaces to ports;
• Confirm you have Ethernet connectivity between remote nodes; - L2TP and VPLS + LAB; • Set L2TP tunnel;• Set VPLS tunnel;• Create bridge and add necessary interfaces to ports;
- L2TP and BCP + LAB;• Set L2TP tunnel;
• Use BCP to bridge PPP interface; • Add to bridge necessary interface; - Multilink Protocol;
• Enable Multilink by specifying correct MRRU settings; • Disable Mangle rules for MSS adjustment; - MLPPP [optional];
• Setup client and specify multiple interfaces for one client; • Set PPPPoE server with MLPPP support;
IPSec
- Introduction;
• Theory and concepts;
• Comparison to other VPN protocols; - IPSec Peer;
• Use different authentication methods; • IPSec exchange modes;
• Encryption and Hash algorithms;
• NAT-Traversal;
• Lifetime and Lifebytes;
• DPD protocol; - Policy;
• IPsec protocol and action; • Tunnels;
• Generate dynamic Policy; - Proposal;
• Encryption and Authentication algorithms; • Lifetime;
• PFS; - Installed-SA; • Flush SA;
- Create IPSec between two routers with NAT + LAB; • Set peer;• Set policy;
• Set NAT rules;
• Confirm the secure link is established;
HotSpot
- Introduction; • Concepts;• Usage environments;• Setup HotSpot with default settings + LAB;
- HotSpot Login Methods + LAB;• HTTP CHAP/PAP; • MAC;
• Cookie;
• HTTPS;• Trial;• RADIUS - Users + LAB;• Add users;
• Set MAC-address for user;
• Set MAC-address for username;
• Limit Uptime and Limit Bytes In/Out; • Reset limits for user; - Monitor Users; • Host Table;• Active Table;• SNMP for users;
- Profile + LAB;• Keepalive timeout; • Shared users;
• Rate-Limit;
• Address-list;• Incoming/Outgoing filter;• Incoming/Outgoing Packet Mark; - Bypass HotSpot;• walled-garden;
• walled-garden ip; • ip-binding; - Customize HotSpot + LAB; • Advertisement;• Customize pages;
Radius
- RADIUS client + LAB; • add radius client;• set service;• use-radius for the specific service;
- RADIUS server;
- User Manager + LAB;
• Install the latest user-manager; • Add routers;
• Add users;
• Set profile; - RADIUS incoming
Ver outline MTCUME